EINECS number 609-405-2
CAS number 37330-39-5
Distilled CNSL (Cashew Nut Shell Liquid), obtained from technical CNSL, is mainly composed of Cardanol. It possesses a typical phenolic structure with a hydrocarbon hydrophobic group on the Meta ring position.
Typical applications of cardanol include epoxy resin diluent, phenalkamine hardener for epoxy resins, cardanol aldehyde resin or phenolic resin and hydrogenated cardanol.
EINECS number 204-626-7
CAS number 123-42-2
Diacetone alcohol or DAA is an oxygenated solvent derived from acetone which has two alcohol and ketone functionalities. It is the solvent of choice for many inks and coatings, including coil coatings, wood varnishes, and architectural coatings. It is also used in the treatment of textiles and leather and is an excellent cleaning solvent. It is a good solvent for many organic peroxides.
EINECS number 201-052-9
CAS number 77-73-6
Dicyclopentadiene, abbreviated DCPD, is the dimer of cyclopentadiene (CPD). In the pure state DCPD is a volatile solid with a characteristic odour. Dicyclopentadiene is coproduced in large quantities in the steam cracking of naphtha and gas oils to ethylene. In addition, it can be prepared in a Diels-Alderreaction of 2 cyclopentadiene molecules.
Most dicyclopentadiene is used as co-monomer in the production of synthetic resins, in particular unsaturated polyesters and synthetic rubbers, for example EPDM. Poly (DCPD), which contains some dicyclopentadiene as monomer is used in printing inks and engineering plastics.
EINECS number 203-868-0
CAS number 111-42-2
Diethanolamines are used in gas treatment, fertilizers production (especially glyphosate), polyols production, cosmetic industry, cocomids production, polyuretans, etc… Chemical formula : C4H11N02
EINECS number 203-202-9
CAS number 104-43-8
Paradodecylphenol is a yellow colored liquid. It is used in industrial and institutional surfactants, phosphite antioxidants for rubber and plastics, lube oil additives (corrosion inhibitor), agricultural chemicals, aromatic oils, germicides, anti-sludge agents.
CAS number 30025-38-8
Ethyl DIPROXITOL is a colourless, hygroscopic, high boiling liquid with a mild odour. It is miscible in any proportion with water and many organic solvents and has good solvent power for nitrocellulose and dyestuffs.
It is used as an intermediate and in formulations in industrial, professional or consumer applications, mainly in surface coatings and printing inks and paints, cleaners, agrochemical or de-icing/anti-icing formulations.
EINECS number 216-374-5
CAS number 1569-02-4
Ethyl Proxitol is a colorless, hygroscopic propylene glycol ether. Used in the surface coatings industry and printing inks and to regulate flow, leveling and coalescence. Possesses good volatility, viscosity and solvent power. Ethyl Proxitol can be used as a coupling agent. Used in adhesives.
EINECS number 203-743-0
CAS number 110-17-8
Fumaric acid is used in the synthesis of several chemicals like unsaturated polyester resins, special alcohols, modification of gum rosin and also in food and beverage applications like sweeteners and acidifier for the soft drinks.
EINECS number 942-085-5
CAS number 1809170-78-2
GTL Solvent GS1927 is a member of the product range that is derived from Gas-To-Liquid (GTL) technology . This technology delivers highly paraffinic products of constant composition. GTL products are typically very low in odour to even odourless . In addition sulphur, olefins, and aromatics levels are very low and even undetectable.
GTL Solvent GS1927 is a wider boiling range product, designed to meet the performance requirements of applications that favour characteristics such as constant quality, very low odour and impurities, but also a high flash point, balanced volatility, low viscosity and density, and a very low sooting tendency.
EINECS number 940-727-9
CAS number 18437281-03-2
GTL Solvent GS215 is a member of the product range that is derived from Gas-To-Liquid (GTL) technology . This technology delivers highly paraffinic products of constant composition. GTL products are typically very low in odour to even odourless . In addition sulphur, olefins, and aromatics levels are very low and even undetectable.
EINECS number 940-730-5
CAS number 1437281-01-0
GTL Solvent GS270 is a member of the product range that is derived from Gas-To-Liquid (GTL) technology . This technology delivers highly paraffinic products of constant composition. GTL products are typically very low in odour to even odourless . In addition sulphur, olefins, and aromatics levels are very low and even undetectable.
EINECS number 940-734-7
CAS number 1437280-85-7
GTL Solvent GS310 is a member of the product range that is derived from Gas-To-Liquid (GTL) technology . This technology delivers highly paraffinic products of constant composition. GTL products are typically very low in odour to even odourless . In addition sulphur, olefins, and aromatics levels are very low and even undetectable.
EINECS number 265-151-9
CAS number 64742-49-0
Hexane Extraction Grade is manufactured to the high standards required by the food and extraction industry. The solvent contains about 50% n-hexane, with a similar content of other hexane isomers. It is very low in aromatics, olefins and other impurities.
EINECS number 265-151-9
CAS number 64742-49-0
Hexane Polymerisation Grade is manufactured to the high standards required by the polymerisation industry. The solvent contains about 50% n-hexane, with a similar content of other hexane isomers. It is very low in impurties such as aromatics, olefins, carbonyls and acid substances.
EINECS number 265-151-9
CAS number 64742-49-0
Isohexane LNH is a narrow boiling range, C6 hydrocarbon solvent with less than 3.5% n-hexane content. It is made from hydrogenated feedstock. Isohexane LNH is used as a solvent and diluent in quick-drying lacquers, paints, varnishes and inks. Possesses very low aromatics and olefins content.
EINECS number 201-126-0
CAS number 78-59-1
Isophorone or IP is an oxygenated solvent derived from acetone with one ketone group. It is an excellent solvent for a wide range of coatings and inks. It is also synthesis intermediate for the production of chloroxylenol (A key antimicrobial) and also synthetic Vitamin E. It is used as an extraction solvent and in frothers and grinding aids.
EINECS number 200-661-7
CAS number 67-63-0
Isopropyl Alcohol is used in a variety of applications including as a solvent for industrial processes and coating; as a component in cleaning, car care and deicing products; as a wetting agent for printing inks and as a feedstock in the manufacture of ester.
EINECS number 203-571-6
CAS number 108-31-6
Maleic anhydride is a white solid. It is manufactured by oxidation of butane or benzene. The main outlet for maleic anhydride is the manufacture of unsaturated polyester resins. Other applications include production of butanediol, tetrahydrofuran, gamma butyrolactone, various other resins copolymers.
EINECS number 203-615-4
CAS number 108-78-1
Melamine is an organic compound with the formula C3H6N6. It is a polyvalent organic base. Melamine structurally consists of an aromatic ring composed of 3 carbon and 3 nitrogen atoms. Melamine is the cyclic trimer of cyanimide.
Melamine is mainly used as raw material for melamine resins and coatings. By a reaction with aldehydes (usually formaldehyde) thermosetting plastics can be produced. Melamine-formaldehyde is strong, light, hard and resistant to acids and bases.
EINECS number 252-104-2
CAS number 34590-94-8
Methyl DIPROXITOL is a colourless, hygroscopic,high boiling liquid with a mild odour. It is miscible in any proportion with water and many organic solvents and has a good solvent power for nitrocellulose and dyestuffs.
This substance is used in the following products: coating products, anti-freeze products and lubricants and greases.
EINECS number 201-159-0
CAS number 78-93-3
Methyl ethyl ketone (MEK or 2-butanone) is a colourless, low viscosity liquid with a mild odour similar to that of acetone. It is completely miscible with many organic liquids, but miscible with water to only a limited extent. With natural and synthetic resins, MEK produces solutions with low viscosity and high solids content.
MEK has exceptionally good solvency for many synthetic and natural resins that are used in the formulation of printing inks, lacquers, and other types of coatings.
EINECS number 203-550-1
CAS number 108-10-1
Methyl isobutyl ketone (MIBK) is the organic compound with the formula (CH3)2CHCH2C(O)CH3. This colourless liquid, a ketone, is used as a solvent for gums, resins, paints, varnishes, lacquers, and nitrocellulose.
EINECS number 203-539-1
CAS number 107-98-2
Methyl Proxytol is an organic solvent with a wide variety of industrial and commercial uses. Similar to other glycol ethers, it is used as a carrier/solvent in printing/writing inks and paints/coatings. It also finds use as an industrial and commercial paint stripper. It is used as an antifreeze in diesel engines.
EINECS number 203-603-9
CAS number 108-65-6
Methyl PROXITOL acetate is a colourless, neutral propylene oxide-based glycol ether acetate with a mild odour and a volatility, viscosity and solvent power similar to those of ethylene glycol-based glycol ether acetates.
EINECS number 205-483-3
CAS number 141-43-5
Monoethanolamines are used for the wood treatment, oil industry and oil treatment, oil additives production, fertilizers production, production of ethylendiamines (piperazine), detergents and surfactants. Chemical formula : C2H7N0
EINECS number 284-325-5
CAS number 84852-15-3
Nonylphenol is produced from the chemical reaction between nonene and phenol. It is mainly a para isomer, phenol, 4-nonyl-, branched.
Nonylphenol is used as a chemical intermediate for the production of ethoxylated nonylphenol (non ionic surfactant), oximes (copper industries), synthesis of additives (TNPP), epoxy and other thermosetting resins. Nonylphenol is also used as specialty solvent for dyes and pigments.
EINECS number 202-679-0
CAS number 98-54-4
Para tertiobutylphenol is a white or light yellow flake solid at room temperature.
It is an intermediate for the production of resins, antioxidants, lubricants and oil field additives, fragrances?rosin derivatives, emulsifiers, dispersants, lubricants, detergents, rubber and painting industry. It is also used as a modifier for epoxide resin, stabilizer of PVC.
EINECS number 203-049-8
CAS number 102-71-6
Triethanolamines are used in cosmetics, cement production, detergents and surfactants, metal working fluids, polyols and lubricants, etc. Chemical formula : C6H15N03